The EU packaging regulation (PPWR, Regulation (EU) 2025/40) has applied since 12 August 2026. For sauces imported from Vietnam, the immediate checks are PFAS limits in food-contact packaging, technical documentation with an EU declaration of conformity, and the importer’s name on pack. Recyclability and recycled-content rules follow from 2030.
1. The news: packaging moves to the centre of EU food trade
On 11 November 2026, the Vietnam Trade Promotion Agency and its partners held the Vietnam Food Forum 2026 in Ho Chi Minh City, alongside the Vietnam Foodexpo trade fair at SECC. According to VietnamPlus (6 November 2026), the forum was co-organised with the Swiss Import Promotion Programme (SIPPO) and the Vietnam Packaging Association, with EU food rules, sustainable packaging, labelling and traceability on the agenda.
In the report published the next day by VietnamPlus (12 November 2026), a speaker from Tetra Pak Vietnam described the PPWR as a new layer of requirements for food exporters, and the article summed it up this way: packaging has become a “market-access gatekeeper” for EU supply chains. A SIPPO expert added that EU sustainability rules push suppliers to do more work on buyer standards, certification and documentation.
2. Market context: which PPWR rules apply now, and which come later?
Some rules of the EU packaging regulation already bind every sauce shipment entering the EU, while the heavier design rules start in 2030. The European Commission states that the regulation has been in force since 11 February 2025 and has applied since 12 August 2026, replacing Directive 94/62/EC. The table below summarises the provisions most relevant to bottled, jarred and pouched sauces, taken from the official text on EUR-Lex.
| Provision | What it requires | Applies from |
|---|---|---|
| PFAS in food-contact packaging (Art. 5(5)) | Max 25 ppb for any single PFAS, 250 ppb for the sum of targeted PFAS, 50 ppm for total PFAS including polymeric PFAS | 12 August 2026 |
| Heavy metals (Art. 5(4)) | Lead, cadmium, mercury and hexavalent chromium together max 100 mg/kg | 12 August 2026 |
| Manufacturer documents (Art. 15) | Conformity assessment, technical documentation and EU declaration of conformity, kept 5 years (single-use) or 10 years (reusable) | 12 August 2026 |
| Importer duties (Art. 18) | Check the manufacturer’s conformity work; show importer name, trade name or trademark and postal address on the packaging | 12 August 2026 |
| Recyclability (Art. 6) | Packaging designed for recycling, within performance grades A, B or C | 1 January 2030 at the earliest |
| Recycled content in plastic (Art. 7) | 30% for contact-sensitive PET packaging, 10% for contact-sensitive non-PET plastic | 1 January 2030 at the earliest |
| Empty space ratio (Art. 24) | Max 50% in grouped, transport and e-commerce packaging; void fill counts as empty space | 1 January 2030 at the earliest |
One point is still moving. The Commission notes that its December 2025 “Environmental Omnibus” proposed suspending the duty for producers to appoint an authorised representative when they sell directly to consumers in other Member States; the proposal was still before the European Parliament and Council when this article was written.
3. Industry pain points
For Asian sauces, the difficulty is less the rules themselves than the paperwork chain behind a single pack. A bottle of chilli sauce combines glass, a metal or plastic cap, a cap liner, a printed label and a corrugated outer carton, often from different suppliers. Each food-contact part must be covered in the technical documentation, and Article 16 obliges packaging suppliers to give the manufacturer the information needed to prove conformity.
- PFAS evidence: grease-resistant sachet papers, coated cartons and some liners are the components buyers most often ask about, and few small packaging suppliers hold test reports against the new limits.
- Multi-layer pouches: laminated spouted pouches are convenient for sauces but may struggle to reach the recyclability grades required from 2030.
- Long record keeping: five or ten years of documents must survive changes of supplier, label or carton size.
- Shipping cartons: oversized master cartons and paper or air-cushion void fill will count against the 50% empty-space limit.

4. Lessons from the field: how should importers prepare?
The practical answer is to treat packaging as a specification item, agreed in writing before the first production run rather than after the goods arrive at an EU port. These five steps are vendor-neutral and follow the obligations in the regulation.
- Map every component. List bottle or jar, closure, liner, label, pouch film and carton, with material and supplier, so the technical file has no gaps.
- Ask for PFAS data early. Request test reports or supplier declarations for every food-contact layer, measured against the Article 5(5) limits.
- Decide who is the “manufacturer”. Under Article 21, an importer that places packaging on the market under its own name or trademark is treated as the manufacturer. Private-label buyers should therefore expect to hold the declaration of conformity themselves.
- Fix the on-pack details. Reserve label space, or a QR code, for the importer’s name and postal address, and keep the same files for later label changes.
- Plan for 2030 now. Review mono-material closures and pouches, right-size master cartons and cut void fill, so a redesign does not land in the same year as a new contract.
5. What this means for your brand
For brands buying sauces from Vietnam, the EU packaging regulation adds a packaging file to the food-safety file. Choosing between bottles, jars, cans and pouches for sauces is now also a compliance decision, and it should be reviewed together with the residue and border-check risks covered in our note on EU checks on Vietnamese chilli.
CiCook fills sauces into jars, bottles, cans, pouches, sachets or bulk packs, at an FDA-registered, ISO 22000:2018 certified facility with a COA for every batch. Packaging format and the documents a buyer needs can be agreed at the specification stage.
FAQ
Does PPWR apply to sauces imported from Vietnam?
Yes. The regulation covers packaging placed on the EU market, including packaging of imported products. The EU importer must check that the manufacturer completed the conformity assessment and must show its own name and postal address on the packaging.
When do EU PFAS limits for food packaging apply?
From 12 August 2026. Food-contact packaging may not exceed 25 ppb for any single PFAS, 250 ppb for the sum of targeted PFAS, or 50 ppm for total PFAS including polymeric PFAS, under Article 5(5) of Regulation (EU) 2025/40.
To discuss packaging formats and documents for an EU sauce programme, contact our export team or message us on WhatsApp +84 813 378 398.
References
- EUR-Lex (22 January 2025): Regulation (EU) 2025/40 on packaging and packaging waste
- European Commission, DG Environment (accessed 13 November 2026): Packaging waste
- business.gov.uk (4 September 2026): EU Packaging and Packaging Waste Regulation (EU PPWR)
- VietnamPlus (12 November 2026): Vietnamese food exporters see EU as major market amid stricter standards
- VietnamPlus (6 November 2026): Vietnam Food Forum 2026 to take place soon
Compiled and edited by the CiCook editorial team from the sources listed under References. For information only; please check the original documents before making business decisions.